Electrical Enclosures— Quick Selector
|
|
| Nema Type 3/3R |
|
|
Application
- Junction box or pull box
- For outdoor use to provide protection against rain, sleet or snow, or indoors where dripping water is a problem
Construction
- Manufactured from 16-, 14-, or 12-gauge G90U galvanized steel
- Cover is designed to fit under the drip shield top, held in place with a plated screw
- Available with or without paint
- Boxes are available with or without concentric knockouts on the bottom
- Mounting embosses are provided on back of each enclosure
- Sealing provisions on front cover
Finish
- ANSI 61 gray polyester powder coating over phosphatized G90U galvanized steel
Accessories
- Replacement Covers
- Touch-up paint
- Cylinder lock
|
 |
Application
- For use as a junction or pull box
- For outdoor use to provide protection against rain, sleet, or snow, or indoors where dripping water is a problem
ConStruction
- Manufactured from 16-, 14-, and 12-gauge steel
- Formed steel hinge with padlockable flip latch
- Available with or without concentric knockouts on the bottom
- 4 mounting holes are supplied on back of box
- Features a drip shield top and seam free sides, front and back
Finish
- Ansi 61 gray polyester powder coating over phosphatized G90U galvanized steel
Accessories
|
|
|
 |
Application
- For use as a telephone cabinet, panel enclosure, or junction box
- For outdoor use to provide protection against rain, sleet, or snow, or indoors where dripping water is a problem
Construction
- Manufactured from 16-, 14-, 12-, or 11-gauge G90U galvanized steel
- Cover is mounted on galvanized lift-off hinges with stainless steel hinge pins. Cover is fastened with a padlockable draw latch.
- Panel mounting studs provided
- Embossed mounting holes
- Knockouts provided on the bottom of the 12126-TC3R and smaller sizes
- Drip shield top and seam-free sides, front back
Finish
- ANSI 61 gray polyester powder coating over phosphatized G90U galvanized steel
Accessories
- Panel
- Touch-up paint
- T-Handle lock
- External mounting-foot kit
|
 |
Application
- For use as a junction or pull box
- For indoor or outdoor use to provide protection against dust and moisture
Construction
- Bodies are made from 14 gauge G90U galvanized steel
- Covers are made from 12 or 10 gauge G90U galvanized steel
- Seam welded construction with no holes are knockouts
- Captivated stainless steel screws thread into sealed wells
- Seamless gasket assures water-tight and dust-tight seal
- Grounding stud on inside back of box
Finish
- Body - ANSI 61 gray polyester powder coating over phosphatized G90U galvanized steel
- Cover- - Unpainted G90U galvanized steel
Accessories
|
|
|
| CT Cabinets |
|
|
Application
- For use as a current transformer cabinet or panel enclosure
- For outdoor use to provide protection against rain, sleet, and snow, or indoor use to protect against dripping water.
Construction
- Enclosure and cover manufactured from 16- or 14-gauge G90U galvanized steel
- The doors are overlapping with no center post
- Continuous door hinge with stainless steel hinge pins
- Three point pad-lockable handle
- Panel mounting studs provided
- Drip shield top and seam free sides, front back
Finish
- ANSI 61 gray polyester powder coating over phosphatized G90U galvanized steel
Accessories
|
|
|
|
|
| JIC Enclosures |
|
|
Application
- Designed to be used as an electrical junction box, terminal wiring box, and instrument housing. Hinged doors provide easy access. For use in protecting interior components from dust, dirt, oil, and water.
Construction
- Constructed of 16 gauge steel
- Seams continuously welded and ground smooth with no holes or knockouts
- Continuous hinge
- Stainless steel clamping hardware to ensure watertight seal
- External mounting feet
- Oil resistant foam-in-place gasket
- Weld nuts provided for optional panel mounting
Finish
- ANSI 61 gray polyester powder coating
Accessories
- Panel
- Touch-up paint
- Fast Operating Clamps
|
|
|
|
|
| Wireways |
|
Application
- Designed to allow long interrupted runs of electrical wiring in applications where moisture and dust are not a problem
- All straight sections and fittings are completely open on one side so wires can be laid-in to the wireway
Construction
- Manufactured from code gauge steel knockouts
- Available with or without knockouts
- Available with our without paint
- Covers incorporate teardrop slots for easy installation and are attached with plated steel screws
- 7 standard sizes: 2.5x2.5, 4x4, 4x6, 6x6, 8x8, 10x10, 12x12
- Wide range of fittings
Accessories
- Replacement Covers
- Touch-up paint
- Barrier Kit
|
Application
- Designed to allow long interrupted runs of electrical wiring in applications where moisture and dust are not a problem
- All straight sections and fittings are completely open on one side so wires can be laid-in to the wireway
Construction
- Manufactured from code gauge steel knockouts
- Available with or without knockouts
- Available with our without paint
- Covers incorporate teardrop slots for easy installation and are attached with plated steel screws
- 7 standard sizes: 2.5x2.5, 4x4, 4x6, 6x6, 8x8, 10x10, 12x12
- Wide range of fittings
Accessories
- Replacement Covers
- Touch-up paint
- Barrier Kit
|
|
|
Application
- Designed to protect wiring in outdoor installations against rain, sleet, snow, or indoors against dripping water
Construction
- Manufactured from 16-gauge G90U galvanized steel
- Available with or without paint
- Cover is designed to fit under the drip shield top, and is held in place with plated steel screws
- Available with or without concentric knockouts on the bottom
- Embossed mounting holes are provided on the backs
Finish
- ANSI gray polyester powder coating over phosphatized G90U galvanized steel
Accessories
|
|
|
|
| Accessories |
|
|
Application
- Designed for use with the SC1 series enclosures for surface mount telephone cabinet applications
- For indoor use to provide protection against contact with enclosed equipment where moisture and dust are not a problem
|
 |
Application
- Designed for use with the SC1 series enclosures for flush mount telephone cabinet applications
- For indoor use to provide protection against contact with enclosed equipment where moisture and dust are not a problem
|
|
|
|
  |
|
|
|
|
|
  |
|
|
|
|
|
-->  |
|
|
Unable to find what you are looking for? Try our
catalog section!
